Mahr | News

How to successfully test dental implants

| Marketing Team
[Translate to English (International):]

Adhering to required tolerances and accelerating healing processes with 3D measurement technology: To ensure that dental implants grow into the jaw quickly and without complications, they require a specific roughness of their surface properties. This is easily achieved with the confocal microscopes of the MarSurf CM series – at the touch of a button and in any production environment.

Teeth are as individual as the people they belong to. The manufacture of dental prostheses, which is still done manually and is very time-consuming, is correspondingly individual. Implants in particular are complex to manufacture: their outer surfaces are made of titanium alloys or zirconium oxide ceramics and must have a certain roughness and surface geometry in order to grow well into the jaw and to be permanently resilient. In some cases, a bioactive coating is also used to accelerate the healing process. To achieve this, these surfaces are structured using various methods, such as blasting with particles, chemical treatment with etching solutions, lasers or lithographic processes. "The goal is to achieve an optimized and repeatable surface topography," explains Mario Adam, Regional Sales Manager 3D Surface at Mahr.

Surface roughness permanently under control

To achieve the necessary roughness tolerances, manufacturers continuously check the surface roughness during the manufacturing process. "The topography of the crown is measured to quantify the volume removal after wear tests," explains Adam. "But the rounded implant tips, the radius, height and angles of the thread, and the roughness in the thread base and flank are also carefully measured." In addition, the volume and preferred direction of the surface must be taken into account, which influence the ingrowth of the implant into the bone tissue of the jaw.

Confocal measurement with the MarSurf CM series

Measuring these minute surfaces is best done in a non-contact, near-production and non-destructive manner. Perfectly suited for this: The MarSurf CM explorer, a compact confocal microscope that can be used to precisely measure and analyze surfaces in three dimensions. Thanks to its robust design and insensitivity to environmental influences, the MarSurf CM explorer is not only suitable for use in test and inspection laboratories, but is also ideally equipped for quality assurance in production environments.

The patented technology enables the non-destructive measurement of polished, rough and transparent surfaces, coatings, as well as roughness measurement according to DIN EN ISO. The steep flanks of the surface structure of the implants can be precisely inspected with the high-precision lens with high numerical aperture [NA] and the HDR camera. The measuring system is fully equipped with automatic lens recognition and collision detection in all spatial directions. The flexible and user-friendly optical measuring system is successfully used for roughness measurement according to DIN EN ISO, for topography measurement as well as for measurement of microgeometry and layer thickness.

 

The advantages of the MarSurf CM series at a glance:

  • Non-destructive measurement of the sample (no pre-treatment necessary).
  • Fast measurement of an implant
  • Measurement of steep flanks
  • Automated quality control
  • Flexibility of the measuring instruments and wide range of parameters
  • Stable measurements with strongly varying reflection properties (high dynamics), e.g. in the transition area between implant and abutment/post

Learn more

Discover our MarSurf CM series and get to know the whole portfolio of 3D measuring microscopes from Mahr.

Info
Felfelé